Woodland Loop Crochet Japanese Knot Bag Pattern
The Woodland Loop bag is a compact crochet Japanese knot bag with two unequal handles that form a simple, hardware-free closure. Pull the longer...

The Woodland Loop bag is a compact crochet Japanese knot bag with two unequal handles that form a simple, hardware-free closure. Pull the longer lavender handle through the shorter one, and the top draws together into the distinctive knot-bag silhouette.
A dense Suzette stitch gives the forest-green body a pebbled texture that looks more intricate than it is. The bag is constructed from two flat rectangles, two simple handle strips, and a narrow contrasting edge. There are no zippers, buttons, granny squares, or complicated shaping.
This free crochet bag pattern is written for a confident beginner who knows single crochet and double crochet. The stitch counts and construction have been mathematically reviewed, but the pattern has not been physically tested. Make a gauge swatch and check the measurements during construction.
Why You’ll Love This Project
The bag body uses a one-row stitch repeat. Once the foundation row is complete, every textured row follows the same sequence.
Working two flat panels eliminates the challenge of maintaining tension in continuous rounds. The panels also make it easy to check the width, height, and symmetry before assembly.
The unequal handles provide both function and visual interest. They close the bag without extra hardware and make the finished project recognizable as a Japanese knot bag.
This design is also easy to customize. You can change the handle length, enlarge the panels, add a lining, or use one color throughout without altering the core construction.
Project Overview
- Project type: Small Japanese knot handbag or project bag
- Difficulty: Confident beginner
- Estimated time: 8–12 hours
- Estimated finished body: 10½ inches wide by 8½ inches high
- Short handle length: Approximately 11 inches
- Long handle length: Approximately 17 inches
- Yarn weight: Category 4 cotton or cotton-blend yarn
- Hook: 5 mm, US H-8, or size required for gauge
- Main techniques: Chain, single crochet, double crochet, slip stitch, and seaming
- Construction: Two textured panels, two handle strips, and contrasting top edging
- Terminology: US crochet terms
Measurements are estimates and may vary with yarn, hook size, tension, and blocking.
Materials and Supplies Needed
- Approximately 450–500 yards of category 4 yarn
- Approximately 350–400 yards forest green for the body
- Approximately 100 yards rich lavender for the handles and edging
- 5 mm crochet hook
- Four locking stitch markers
- Yarn needle
- Scissors
- Flexible measuring tape
- Optional fabric and sewing supplies for a lining
Avoid loosely spun yarn if the bag will receive frequent use. A smooth yarn produces stronger seams and clearer stitch definition.
Choosing the Right Yarn and Hook
Cotton or a cotton-acrylic blend is recommended because it creates a defined texture and generally stretches less than soft acrylic. A tightly spun recycled cotton can also work if it is smooth enough to pass through the hook without splitting.
Category 4 yarn gives the bag practical structure while remaining comfortable to carry. A lighter yarn will create a smaller bag unless you add stitches and rows. A bulky yarn can make the handles thick and may distort the knot closure.
The suggested 5 mm hook should create dense but flexible fabric. If you can easily see through the panel, try a smaller hook. If the fabric feels rigid or your hands become uncomfortable, move up one hook size.
Gauge
In Suzette stitch:
- 14 stitches = 4 inches
- 13 rows = 4 inches
For the handles in single crochet:
- Approximately 15 stitches = 4 inches
- Approximately 16 rows = 4 inches
Handle length is more important than row gauge. Measure each strip without stretching it.
Crochet Stitches and Abbreviations
- ch — chain: Yarn over and pull through the loop on the hook.
- sc — single crochet: Insert the hook, yarn over, pull up a loop, yarn over, and pull through both loops.
- dc — double crochet: Yarn over, insert the hook, yarn over, pull up a loop, yarn over and pull through two loops twice.
- sl st — slip stitch: Insert the hook, yarn over, and pull through the stitch and loop on the hook.
- st — stitch
- sts — stitches
- RS — right side
- WS — wrong side
Suzette Stitch
Work one sc and one dc in the same stitch, then skip the following stitch. Each repeat uses two foundation stitches and produces two new stitches.
The turning chain does not count as a stitch.
Before You Start
Make a swatch using at least 20 stitches and work approximately 16 rows. Wash and dry it according to the yarn label before measuring if the finished bag will be laundered the same way.
The panels require an even stitch count. Place a marker in the first and last stitch of each row until the edges are easy to identify.
The Suzette pattern naturally creates a textured fabric with two slightly different surfaces. Choose the side you prefer as the right side and use that choice consistently on both panels.
The handles are deliberately different lengths. Mark them immediately after completion so they are not attached to the wrong panels.
Step-by-Step Crochet Instructions
Make the First Body Panel
With forest-green yarn, ch 41.
Row 1: Sc in the second ch from the hook and in each ch across. You should have 40 sc. Ch 1 and turn.
Row 2: Work one sc and one dc in the first st. Skip the next st. Repeat the following sequence across:
Work one sc and one dc in the next st, skip the following st.
You should have 20 clusters and 40 total stitches. Ch 1 and turn.
Rows 3–30: Repeat Row 2.
At the end of Row 30, fasten off. The panel should measure approximately 11½ inches wide by 9¼ inches high before seaming.
Make the Second Body Panel
Repeat the first-panel instructions exactly.
Lay the panels together and verify that they have the same width, height, and number of rows. Correct any noticeable difference before adding the edging.
Add the Lavender Top Edging
With the RS of the first panel facing you, join lavender yarn in the top-right corner.
Edging Row: Ch 1 and work 1 sc in each of the 40 top stitches. Fasten off.
Repeat on the second panel.
Each top edge should still contain 40 stitches.
Crochet the Short Handle
With lavender yarn, ch 7.
Row 1: Sc in the second ch from the hook and in each remaining ch. You should have 6 sc. Ch 1 and turn.
Rows 2–44: Sc in each of the 6 sts. Ch 1 and turn after Rows 2–43.
Fasten off after Row 44, leaving a 20-inch sewing tail.
The relaxed strip should measure approximately 11 inches long and 1½ inches wide.
Crochet the Long Handle
With lavender yarn, ch 7.
Row 1: Sc in the second ch from the hook and in each remaining ch. You should have 6 sc. Ch 1 and turn.
Rows 2–68: Sc in each of the 6 sts. Ch 1 and turn after Rows 2–67.
Fasten off after Row 68, leaving a 20-inch sewing tail.
The relaxed strip should measure approximately 17 inches long and 1½ inches wide.
Attach the Short Handle
Place the first panel RS up.
Position one end of the short handle over the first 6 stitches of the lavender top edge. The end of the strip should overlap the edging by approximately ½ inch.
Use the matching yarn tail to sew through both layers several times. Work across the attachment, then sew back in the opposite direction to reinforce it.
Bring the free end of the handle to the final 6 stitches on the same panel. Ensure the strip is not twisted. Sew it securely using the same reinforced method.
The unworked 28 stitches between the attachment points form the bag opening.
Attach the Long Handle
Attach the long handle to the second panel using the same method:
- Sew one end over the first 6 top stitches.
- Keep the handle flat and untwisted.
- Sew the second end over the final 6 top stitches.
- Leave the center 28 stitches unobstructed.
The long handle should form a visibly larger loop than the short handle.
Reinforce the Handle Attachments
Thread a second length of lavender yarn through the needle. Sew a small rectangle around each attachment area, then add one diagonal line across the rectangle.
Keep the stitches inside the crocheted fabric rather than pulling them around the outer edge. This prevents a bulky ridge and distributes the load across several rows.
Assembly and Finishing
Place the body panels together with their wrong sides facing outward and their handle openings aligned.
Using forest-green yarn and a yarn needle, seam down the first side, across the bottom, and up the second side. Use a firm whip stitch or mattress-style seam, catching one full edge stitch from each panel.
Do not sew across the lavender top edges. The entire top remains open.
Turn the bag right side out. Push the bottom corners outward gently with your fingers and smooth the side seams.
Weave each yarn tail through several stitches, change direction, and weave through a second section before trimming. Pay special attention to the handle attachments and bottom corners.
To close the bag, pass the long handle completely through the short handle. Pull the long loop upward so the shorter loop gathers the opening.
Tips for Best Results
Keep the panel edges straight by marking the first and last stitch of every row. Missing an edge stitch will make the panels difficult to align.
Avoid making the handle stitches excessively tight. A rigid handle will be uncomfortable and may pull against the attachment points.
Use the same hook and tension for both panels. Even a small gauge difference can cause the assembled bag to twist.
Block the body panels before attaching the handles if one panel is slightly uneven. Confirm that both are completely dry before assembly.
When sewing a handle, pass the needle through complete stitches rather than individual yarn strands. Splitting the yarn can weaken the join.
Do not overload an unlined crochet bag with heavy or sharp objects. Crochet fabric can stretch, and small items may work through the stitches.
Common Mistakes and Troubleshooting
The panel stitch count is changing
Every row must contain 20 Suzette clusters and 40 stitches. Check that each cluster contains exactly one sc and one dc, followed by one skipped stitch.
The edges are slanting
You may be missing the first or last stitch. Place a marker in both edge stitches and count the 40 stitches before turning.
One panel is larger
The panels were probably made with different tension. Light blocking may correct a small difference. A significant difference is best fixed by remaking the larger or smaller panel.
The bag opening looks twisted
One handle may have been rotated before its second end was attached. Detach that end, lay the strip flat, and resew it.
The knot closure will not slide easily
The short handle may be too narrow or too tight. Add several rows if necessary, or make the long handle slightly narrower by using five stitches instead of six.
The handles sag after use
Cotton can relax under weight. Shorten the affected handle or sew a ribbon lining to its underside for additional stability.
The seams appear bulky
Use a mattress-style seam rather than crocheting through both panels with a thick slip-stitch ridge. Keep the seam tension firm but not tight.
Creative Variations
Make the entire bag in one solid color for a minimalist version that emphasizes the pebbled texture.
Reverse the palette by using lavender for the body and forest green for the edging and handles.
For a larger project bag, begin each panel with 49 chains for 48 working stitches. Add enough rows to maintain the desired proportions, then increase the distance between the handle attachments.
A narrow contrasting stripe can be added by changing color for two or four complete body rows. Avoid frequent color changes if you prefer fewer ends to weave in.
For a lined version, cut two fabric rectangles slightly larger than the finished panels. Sew the fabric lining separately, insert it into the completed bag, and hand-sew its upper edge below the lavender crochet edging.
An internal pocket can be attached to the lining. Sewing it to the crochet body itself may distort the textured fabric.
How to Use or Style Your Crochet Bag
The Woodland Loop bag works well as a small everyday handbag, lunch bag, yarn-project carrier, or reusable gift bag. Its compact opening is best suited to items that fit comfortably through the handle loops.
Forest green and lavender create a colorful but grounded combination that pairs well with denim, cream, burgundy, and neutral outerwear.
Threading the long handle through the short one creates a convenient wrist or hand-carry loop. This closure helps gather the opening, but it is not a secure substitute for a zipper when carrying valuables.
Avoid carrying heavy books, sharp tools without protective cases, or objects that could catch on the stitches.
Care and Maintenance
Follow the care directions on the yarn label. Cotton yarn can shrink, fade, or become heavier when wet, depending on its construction.
For gentle cleaning, hand-wash the bag in cool water with a small amount of mild detergent. Support the entire bag when lifting it from the water rather than pulling it by a handle.
Press out moisture with a towel without twisting. Reshape the panels, seams, opening, and handles before drying the bag flat.
If the yarn label permits machine washing, place the bag in a mesh laundry bag and select a gentle cycle. Air-drying is recommended to reduce stress on the handles.
Store the bag empty and flat or lightly filled with clean tissue. Hanging it for long periods may stretch the long handle.
Inspect the handle attachments regularly and repair loose stitches before continued use.
Frequently Asked Questions
Is this Japanese knot bag suitable for beginners?
It is appropriate for a confident beginner who can make consistent single and double crochet stitches. The panels are simple rectangles, but careful seaming and handle attachment are required.
Can I use acrylic yarn?
Yes. Choose a smooth, firmly spun acrylic and consider using a slightly smaller hook to produce dense fabric. Acrylic may stretch more than cotton.
Why are the handles different lengths?
The longer handle passes through the shorter handle, gathering the opening and creating the characteristic knot-bag closure.
Can I make the handles wider?
Yes. Begin with eight or nine chains instead of seven and work the desired number of single crochet stitches. Adjust the attachment area so it matches the new width.
Does the bag need a lining?
A lining is optional. It can reduce stretching, prevent small objects from poking through, and protect the crochet fabric from sharp contents.
How can I make the bag deeper?
Add rows equally to both body panels. Every four additional rows will add approximately 1¼ inches at the suggested gauge.
Can I crochet the panels in a different stitch?
Yes, but the replacement stitch must create dense, stable fabric and maintain an even count of 40 stitches. Make a new gauge swatch before determining the panel dimensions.
Has this pattern been physically tested?
No. It is an original, mathematically reviewed pattern draft and has not been physically tested. Check your gauge, measure both panels, and test the handle attachment before carrying the bag.
Conclusion
The Woodland Loop crochet Japanese knot bag combines simple rectangular construction with a distinctive handle closure. Its dense Suzette-stitch body provides rich texture, while the lavender handles create a strong contrast against the forest-green panels.
Once you understand the single-row repeat, the project becomes straightforward and relaxing. Adjust the colors, dimensions, lining, or handle lengths to create a bag suited to your wardrobe or intended use.
Related Crochet Projects
- A dense Suzette-stitch market tote with reinforced straps
- A small crochet wristlet with a fabric lining
- A rectangular crochet project bag with drawstring handles
- A matching textured crochet notions pouch