Crochet Pothos Wall Planter Pattern
This crochet pothos plant pattern turns simple yarn into cheerful, maintenance-free wall decor. The design combines a terracotta-colored ribbed planter, a dark soil insert,...

This crochet pothos plant pattern turns simple yarn into cheerful, maintenance-free wall decor. The design combines a terracotta-colored ribbed planter, a dark soil insert, five trailing vines, and layered heart-shaped leaves inspired by the varied coloring of pothos foliage.
The pot is constructed from a flat rectangle, while the vines use basic chains and slip stitches. Each leaf consists of a heart-shaped base with a smaller contrasting layer that creates the variegated look seen in the finished design.
This pattern is best suited to a confident beginner who is comfortable working in the round. You will learn how to make ribbed crochet fabric, create flat circular pieces, assemble decorative vines, and arrange the leaves naturally.
Why You’ll Love This Project
This crochet plant adds color to rooms where a living plant may not thrive. It does not need sunlight, watering, or pruning, making it useful for offices, craft rooms, hallways, and other indoor spaces.
The construction is approachable because the pot begins as a rectangle and requires no complicated shaping. The vine lengths and leaf colors are easy to customize, and small yarn leftovers can be used for many of the decorative pieces.
The finished plant also makes a thoughtful housewarming gift. Because it is decorative rather than functional, you can experiment with bold colors that might not suit a real houseplant.
Project Overview
- Project type: Hanging crochet plant and wall decor
- Difficulty: Confident beginner
- Estimated time: 10–14 hours
- Finished pot size: Approximately 5 inches wide and 5¾ inches tall
- Maximum trailing length: Approximately 24 inches below the pot
- Yarn weight: Medium weight 4
- Recommended hook: 4 mm
- Main techniques: Chains, slip stitches, single crochet, half double crochet, double crochet, treble crochet, increases, and back-loop ribbing
- Construction: Seamed ribbed pot, circular base and soil insert, five separate vines, layered leaf motifs, and two hanging straps
- Terminology: US crochet terms
The dimensions and working time are estimates. Your results will depend on yarn, gauge, tension, and leaf arrangement.
Materials and Supplies Needed
- 150 yards of medium weight 4 cotton or cotton-blend yarn in terracotta
- 50 yards of medium weight 4 yarn in dark brown
- 70 yards in forest green
- 60 yards in emerald or medium green
- 40 yards in golden chartreuse
- 25 yards in warm ivory
- 4 mm crochet hook
- Locking stitch markers
- Yarn needle
- Scissors
- Approximately 3 ounces of polyester fiberfill
- One 5-inch circle of plastic canvas for optional base support
- One sturdy wall hook appropriate for the wall and finished weight
Avoid inserting wire into the vines if the piece will be displayed where children or pets could reach it.
Choosing the Right Yarn and Hook
Cotton or a cotton-acrylic blend gives the pot enough structure while preserving clear stitch definition. A smooth, tightly spun yarn is easier for beginners to use than fuzzy or loosely plied yarn.
Medium weight 4 yarn works well with a 4 mm hook for a firm decorative fabric. If your stitches are loose enough for stuffing to show through, move down to a 3.5 mm hook. If the ribbed fabric feels rigid and difficult to work, try a 4.5 mm hook.
Substituting a lighter yarn will create a smaller, more delicate plant. A heavier yarn will increase the finished size and weight, so stronger hanging hardware may be required.
Crochet Stitches and Abbreviations
- ch — chain: Yarn over and pull through the loop on the hook.
- sl st — slip stitch: Insert the hook, yarn over, and pull through the stitch and loop on the hook.
- sc — single crochet: Insert the hook, yarn over and pull up a loop, yarn over, and pull through both loops.
- hdc — half double crochet: Yarn over, insert the hook, pull up a loop, yarn over, and pull through all three loops.
- dc — double crochet: Yarn over, insert the hook, pull up a loop, then complete two yarn-over-and-pull-through-two steps.
- tr — treble crochet: Yarn over twice, insert the hook, and pull up a loop. Yarn over and pull through two loops three times.
- BLO — back loop only: Work into the loop farthest from you.
- inc — increase: Work two single crochet stitches in one stitch.
- st/sts — stitch/stitches
- MR — magic ring
- RS/WS — right side/wrong side
Beginning chains do not count as stitches unless stated otherwise.
Before You Start
The suggested gauge for the ribbed pot is approximately 16 stitches and 16 rows in BLO single crochet per 4 inches after light blocking. The circular pieces should form flat disks without cupping or ruffling.
Make a small swatch before beginning the pot. Accurate row gauge matters because the rows become the pot’s circumference.
The pot is decorative and is not designed to hold soil or a living plant. Secure the wall hook according to its manufacturer’s directions and keep the finished piece away from open flames, cooking surfaces, and damp locations.
Step-by-Step Crochet Instructions
Make the Ribbed Pot
With terracotta yarn:
- Ch 24.
- Row 1: Sc in the second ch from the hook and in each remaining ch. Turn. You should have 23 sts.
- Row 2: Ch 1, sc BLO in each st across. Turn. You should have 23 sts.
- Rows 3–64: Repeat Row 2.
- Fasten off, leaving a 24-inch tail.
The rectangle should measure approximately 5¾ inches tall and 16 inches long. Place the short ends together with the ribbed RS facing outward. Whipstitch through both layers to form a tube.
Make the Pot Base
With terracotta yarn, work continuously:
- Round 1: Make 6 sc in an MR. Place a marker. (6)
- Round 2: Inc in every st. (12)
- Round 3: Repeat sc in next st, inc in next st around. (18)
- Round 4: Repeat sc in next 2 sts, inc around. (24)
- Round 5: Repeat sc in next 3 sts, inc around. (30)
- Round 6: Repeat sc in next 4 sts, inc around. (36)
- Round 7: Repeat sc in next 5 sts, inc around. (42)
Sl st in the next st and fasten off with a long sewing tail.
Center the base over one opening of the pot tube. Sew one base stitch to approximately one pot-row end around the opening, distributing the six extra pot rows evenly.
If desired, place a 5-inch plastic-canvas circle inside the pot against the crocheted base.
Make the Soil Insert
With dark brown yarn, repeat Rounds 1–7 of the pot base to make a second 42-stitch disk. Fasten off with a long tail.
Set the soil insert aside until the vines and crown leaves have been attached.
Make Five Vines
Use forest green, emerald, or chartreuse yarn. Leave a 10-inch beginning tail on every vine for attachment.
- Vine 1: Ch 43. Sl st in the second ch from the hook and in every ch across. (42 sl sts)
- Vine 2: Ch 51. Work back with 50 sl sts.
- Vine 3: Ch 59. Work back with 58 sl sts.
- Vine 4: Ch 67. Work back with 66 sl sts.
- Vine 5: Ch 75. Work back with 74 sl sts.
Fasten off each vine with an 8-inch tail. The approximate lengths should range from 12 to 24 inches, depending on tension.
For a slightly curled vine, keep the slip stitches firm. For a straighter vine, work them loosely.
Make the Heart-Leaf Bases
Make 24 large heart bases in a varied mixture of forest green, emerald, and chartreuse.
- Form an MR.
- Working into the ring, make ch 3, 3 tr, 3 dc, ch 1, 1 tr, ch 1, 3 dc, 3 tr, ch 3, and sl st.
- Tighten the ring carefully.
- Fasten off with a 10-inch tail.
The single treble between the two chain-1 spaces creates the bottom point. The two groups of treble stitches form the rounded upper lobes.
Make the Contrasting Leaf Layers
Make 24 smaller accent pieces in chartreuse or warm ivory.
- Ch 6.
- Sl st in the second ch from the hook.
- Sc in the next ch, hdc in the next ch, and dc in the next ch.
- Work 5 dc in the final ch.
- Continue along the unused side of the foundation chain: dc in the next loop, hdc in the next, sc in the next, and sl st in the final loop.
- Fasten off with a tail for sewing.
Position one accent piece along the center of each heart base. Sew through the accent layer and heart without pulling tightly enough to distort the motif. Leave a green border visible so the leaf retains its heart shape.
Attach Leaves to the Vines
Arrange the leaves before sewing so adjacent colors do not repeat too heavily.
- Attach 3 leaves to Vine 1.
- Attach 4 leaves to Vine 2.
- Attach 4 leaves to Vine 3.
- Attach 5 leaves to Vine 4.
- Attach 5 leaves to Vine 5.
This uses 21 leaves. Reserve the final 3 leaves for the top of the planter.
Place the first leaf approximately 2 inches below the top of each vine. Space the remaining leaves 3–4 inches apart, alternating sides. Sew the top center of each heart securely around the vine, then pass the yarn through the leaf once more to prevent twisting.
Attach the Vines to the Soil
Arrange the five vines across the soil disk, leaving about 1 inch between attachment points. Pull each beginning tail through the disk and sew the upper inch of the vine flat against it.
Attach the three reserved leaves around the top to create a full crown. Keep the disk’s outermost stitches clear for final assembly.
Stuff and Close the Pot
Fill the pot with polyester fiberfill. Add enough stuffing to support the soil disk without stretching the ribbed sides.
Place the prepared soil insert over the opening. Pin or mark it at four evenly spaced points. Sew it to the pot rim, matching the 42 soil stitches across the 64 row ends as evenly as possible.
A practical distribution is to sew two soil stitches across three pot-row ends at regular intervals. The exact placement is less important than keeping the opening round and the soil disk level.
Make the Hanging Straps
Make two straps in terracotta:
- Ch 71.
- Sc in the second ch from the hook and in each ch across. (70)
- Fasten off with long tails at both ends.
Mark four equally spaced points around the pot rim. Sew the ends of Strap 1 to two opposite marks. Sew Strap 2 to the remaining opposite marks.
Bring the straps together above the planter. Wrap a separate 10-inch strand tightly around their crossing point several times, knot securely, and weave in the ends. The crossed straps form a stable hanging loop.
Assembly and Finishing
Check that all five vines hang independently and that the leaves face outward. Rotate any crowded leaves before tightening their attachment stitches.
Weave in every end on the WS of the work. Use several directional changes so the ends cannot pull free under the weight of the hanging plant.
Lightly steam the straps and leaves if the yarn label allows it. Do not press the iron directly onto the crochet. Shape each heart with your fingers while the fibers cool.
Hang the planter and step back to inspect its balance. If one side appears heavier, reposition a vine or add a small hidden anchoring stitch between the soil disk and rim.
Tips for Best Results
Keep the pot stitches firm so the fiberfill does not show between them. Count all 64 ribbed rows; an inaccurate row count can make the soil and base disks difficult to fit.
When making the hearts, tighten the magic ring after completing every stitch. Tightening it too early can make the final stitches difficult to place.
Vary the direction of the leaves instead of lining them up in identical rows. A few forward-facing leaves combined with several angled leaves create a fuller, more natural appearance.
Attach the vines through multiple stitches of the soil disk. One small stitch may not support the combined weight of a long vine and its leaves.
Common Mistakes and Troubleshooting
The pot opening looks oval
The soil disk may have been attached unevenly. Divide both the disk and pot rim into four marked sections before sewing, then distribute each quarter independently.
The base ruffles
Your increases may be too loose or the hook may be too large. Try a smaller hook or omit the last increase round if the disk already matches the pot opening.
The disk forms a bowl
The tension may be too tight. Move up one hook size for the circular pieces or add one evenly spaced increase round.
The leaves twist backward
Use two attachment points at the top of each heart rather than one. This stabilizes the leaf against the vine.
The pot sags when hung
Add more stuffing, insert a plastic-canvas base, and confirm that all four strap ends are attached through several strong stitches.
The vines are too stiff
Loose slip stitches produce a softer cord. You can also replace the slip-stitched vine with a simple chain, although it will be thinner.
Creative Variations
Create a neon pothos by using lime and yellow-green yarn for most leaves. For a marble-queen effect, use warm ivory accent layers over deep green hearts.
Shorten all five vines for a compact shelf plant, or lengthen them by adding more foundation chains. Keep the leaves spaced at least 2½ inches apart so the design does not become visually crowded.
The ribbed pot can be made in denim blue, mustard, burgundy, or natural white. For subtle texture, alternate terracotta and rust every eight rows while making the pot rectangle.
You can also omit the straps and place the stuffed planter on a shelf. Add a small weighted pouch beneath the fiberfill if extra stability is needed.
How to Use or Style Your Crochet Project
Hang the planter beside a window, above a craft desk, or in a gallery-wall arrangement. The terracotta and green palette pairs naturally with warm wood, neutral walls, and botanical artwork.
Because this is a soft decorative item, it works well in spaces where breakable ceramic pots would be inconvenient. It should still be hung out of reach of infants and pets because the trailing vines may present an entanglement hazard.
Do not use the crochet pot as a cover for a living plant unless it can be kept completely separate from water and damp soil.
Care and Maintenance
Remove dust with a lint roller on a low-tack setting or use a vacuum’s upholstery attachment at minimum suction. Support the vines with your hand while cleaning them.
For deeper cleaning, follow the yarn label. If the fibers permit hand washing, use cool water and a small amount of mild detergent. Avoid twisting the vines or wringing the pot.
Press out moisture in a towel, reshape every leaf, and dry the plant flat. Do not hang it while wet because the weight can stretch the straps and vines.
Store the plant flat in a breathable container. Avoid folding the heart leaves sharply or placing heavy objects on top.
Frequently Asked Questions
Is this crochet plant suitable for a complete beginner?
A new crocheter who can make basic stitches may be able to follow it, but the magic ring, treble stitches, and circular increases make it most appropriate for a confident beginner.
Can I make the leaves without a magic ring?
Yes. Chain 4 and join with a slip stitch to form a ring, then work the heart stitches into that ring. The center opening may be slightly more visible.
How many leaves does the pattern use?
The design uses 24 layered leaves: 21 distributed across five vines and three arranged at the top of the planter.
Can I use acrylic yarn?
Yes. Choose a smooth acrylic yarn with good stitch definition. Acrylic may create a softer pot, so plastic canvas or firmer stuffing can help preserve the shape.
How can I make the plant smaller?
Use medium weight 3 yarn and a 3–3.5 mm hook, or reduce the pot rectangle to 19 stitches and approximately 52 rows. Make matching circular pieces that fit the altered opening.
Can I place a real plant inside it?
This pattern is intended as a stuffed decorative plant. Moisture from a living plant could damage the yarn, stuffing, and internal support.
Do the vines need wire?
No. The slip-stitched cords hang naturally without wire. A wire-free design is also easier to wash and store.
How do I prevent the hanging straps from stretching?
Cotton yarn stretches less than many soft acrylics. Work the straps firmly, attach each end through multiple stitches, and avoid making the planter excessively heavy.
Conclusion
This crochet pothos wall planter combines a structured ribbed pot with colorful vines and layered heart leaves. Each component uses repeatable construction, making the project approachable while still offering plenty of visual detail.
Adjust the vine lengths, leaf colors, and pot shade to complement your room. Once assembled, the finished plant provides a bright botanical accent without watering or seasonal maintenance.
Related Crochet Projects
- A small crochet succulent garden with removable plants
- A hanging string-of-pearls crochet planter
- Textured crochet pot covers for artificial plants
- A framed collection of dimensional crochet leaves