Colorful Granny Square Cardigan Pattern with Teal Trim
This granny square cardigan combines colorful crochet motifs with simple sleeves and deep teal ribbing. Its open-front shape is easy to layer, while the...

This granny square cardigan combines colorful crochet motifs with simple sleeves and deep teal ribbing. Its open-front shape is easy to layer, while the raspberry sleeves and jewel-toned squares give it a bold, coordinated look.
The pattern below is a design draft, not a physically tested pattern. It uses US crochet terms and basic stitches, but fit and yarn use will vary with your gauge. Make a square and sleeve swatch before committing to the full cardigan.
Why You’ll Love This Project
- The cardigan is assembled from straightforward squares and rectangular sleeve panels.
- You can use leftover yarn for the square centers and keep the main colors consistent.
- The open front needs no buttonholes or closures.
- The length and width can be adjusted by changing square size or adding squares.
- The ribbed trim gives the patchwork a clean, finished edge.
Project Overview
- Project type: Open-front patchwork cardigan
- Difficulty: Confident beginner; requires basic crochet and garment assembly
- Estimated time: About 25–40 hours, depending on experience
- Suggested size: Approximate adult S/M, designed for about 4 inches of positive ease
- Suggested finished dimensions: About 40 inches around the body and 18 inches long, including the hem band
- Yarn: Medium-weight yarn
- Hook: 5.5 mm (I/9), adjusted as needed for gauge
- Main techniques: Double crochet granny clusters, half double crochet, ribbing, seaming
- Construction: Ten granny squares form the body; two rectangular panels form the sleeves
- Terminology: US crochet terms
These measurements are estimates. Use your own body measurements and a gauge swatch to guide fit.
Materials and Supplies Needed
- About 1,100–1,400 yards of medium-weight yarn, depending on size, fiber, and square dimensions
- Main colors: deep teal, warm ivory, and plum
- Accent colors: raspberry, coral, golden mustard, emerald, and cobalt
- 5.5 mm (I/9) crochet hook, or the size needed to meet gauge
- Stitch markers
- Yarn needle
- Scissors
- Tape measure
The pictured cardigan uses a deep teal neckline and hem, teal cuffs, raspberry sleeves, and multicolor squares. You can simplify the palette by using fewer colors.
Choosing the Right Yarn and Hook
A smooth medium-weight acrylic, wool, or wool blend shows the granny clusters clearly and provides warmth. Acrylic is often easy to care for; wool and wool blends may have more warmth and drape. Check the yarn label before washing.
Use the hook size that gives you a flexible fabric rather than a stiff square. A smaller hook makes denser fabric; a larger hook makes softer, looser squares. Keep the square fabric and sleeve fabric similar in weight so the seams sit evenly.
For the sleeve panels, aim for a gauge near 13 half double crochet stitches and 10 rows per 4 inches. Granny-square gauge is best checked by measuring a finished square. If your square is too small, continue crocheting rounds until it reaches the target size.
Crochet Stitches and Abbreviations
- ch — chain
- sl st — slip stitch
- sc — single crochet
- hdc — half double crochet
- dc — double crochet
- st / sts — stitch / stitches
- sp — space
- rep — repeat
- RS / WS — right side / wrong side
A granny cluster is a group of three double crochet stitches worked in the same space.
Before You Start
Measure your chest, desired cardigan length, and sleeve length. The sample layout uses ten squares that each measure about 8 inches: six for the back and two for each front. That makes the body approximately 40 inches wide before edging.
Make one square and a sleeve swatch first. Wash and dry them as you expect to care for the finished garment, then remeasure. If you need a different size, change the square dimensions or add a square column to the back. For better fit, pin the layout together and compare it with a garment you already like.
Use stitch markers to label the top of each square and keep color placement organized.
Step-by-Step Crochet Instructions
Make the granny squares
Make 10 squares, each approximately 8 inches across. Use a different accent color for the center of each square, then repeat the same framing colors to unify the patchwork. Change colors at the start of a new round when desired.
Round 1: Make a magic ring. Ch 3 (counts as dc), work 2 dc into the ring, ch 2. Work 3 dc into the ring, ch 2. Rep from * twice more. Join with a sl st to the top of the beginning ch-3. You should have four 3-dc groups with a ch-2 corner space between each group.
Round 2: Sl st across to the next corner space. Ch 3, 2 dc, ch 2, 3 dc in that corner space. Ch 1. In each remaining corner space, work 3 dc, ch 2, 3 dc; ch 1 between corners. Join to the top of the beginning ch-3.
Round 3 and later: Sl st across to the next corner space. In each corner space, work 3 dc, ch 2, 3 dc. In each ch-1 space along a side, work 3 dc. Ch 1 between clusters. Join to the beginning ch-3. Each round adds one cluster to each side of the square.
Continue until the square measures about 8 inches. Fasten off and weave in the ends. Make all ten squares the same size.
Join the body squares
Lay out six squares in a 3-by-2 rectangle for the back. Arrange the remaining four in two 1-by-2 columns for the front panels. Place the colors so the front panels look balanced.
Join the squares with a whip stitch or slip stitch through the back loops. Keep the seams relaxed so they do not pull the fabric out of shape.
The back panel should measure about 24 inches wide and 16 inches tall. Each front panel should measure about 8 inches wide and 16 inches tall.
Join the shoulders and form the armholes
Place the front panels over the back with right sides together. Join each front to the back along the top outer edge for about 8 inches, leaving the center opening for the neckline. Try the body on over your shoulders or compare it with a garment that fits comfortably.
Seam each side from the hem upward for about 8 inches. Leave the upper 8 inches open on each side for the armholes. Adjust this opening if you want a wider or narrower sleeve fit.
Make the sleeve panels
Make two rectangular panels in raspberry or your chosen sleeve color.
With the 5.5 mm hook, ch 53. This gives approximately 52 hdc stitches after the turning chain is excluded.
Row 1: Hdc in the second ch from the hook and in each ch across. You should have 52 hdc.
Row 2: Ch 1 and turn. Hdc in each st across.
Repeat Row 2 until the panel measures about 18 inches long, or your preferred sleeve length. Keep the stitch count at 52. Make a second panel to match.
Fold each panel lengthwise with the right sides together. Seam the long edges to form a tube, leaving the short ends open. The open edge should measure close to the armhole opening; adjust the panel width before seaming if needed.
Attach the sleeves
With the body turned inside out, place one sleeve tube inside an armhole with the sleeve seam facing down. Match the sleeve seam to the body side seam and pin the remaining edges evenly. Sew the sleeve to the armhole with a yarn needle. Repeat for the second sleeve.
Try the cardigan on before weaving in all ends. If the sleeve seam feels tight, remove a few stitches and rework it with a looser seam.
Add the hem and front edging
Join teal yarn at the lower edge. Work hdc evenly across the hem, placing one hdc in each stitch or space. At the corners, work 3 hdc in one space to help the edging turn without pulling. Join with a sl st.
For a simple ribbed hem, work rows of hdc in the back loop only across the hem, turning at the end of each row. Continue until the band is about 2 inches deep, then sew the short ends together neatly.
Work the same back-loop hdc ribbing around each cuff, making the cuff about 2 inches deep. To finish the front opening and neckline, work hdc evenly from one lower front edge, up around the neckline, and down the other front edge. Add more back-loop hdc rows if you want a wider teal band.
Assembly and Finishing
Check the shoulder seams, side seams, and sleeve joins for gaps. Weave in all yarn ends on the wrong side, changing direction a few times to secure them. Lay the cardigan flat and gently shape the front edges and ribbing.
If the yarn allows it, wet block the cardigan according to the yarn label. Avoid pulling the squares or ribbing wider than intended.
Tips for Best Results
- Measure each square as you go so all ten finish at the same size.
- Keep color changes and ends on the wrong side where possible.
- Pin sleeve panels to the armholes before sewing to distribute any small differences evenly.
- Use a larger hook for ribbing if your edges feel tight.
- Compare the cardigan with your measurements before finishing the front band, since edging can change the fit slightly.
Common Mistakes and Troubleshooting
The squares curl or buckle. Check your tension and make sure the corner spaces are not being skipped. A slightly larger hook may help if the fabric is stiff.
The body seams pucker. Pin the squares at each corner and halfway along the edges before sewing. Use a relaxed seam rather than pulling the yarn tight.
The sleeves do not fit the armholes. Recheck the sleeve panel width and the depth of the armhole opening. Adjust one of these before sewing the sleeve in place.
The cardigan feels too small. Add a square column to the back or make larger squares. For a longer body, add another square row.
The front edges flare. Work fewer edging stitches where the fabric naturally curves, while keeping the edge smooth and flat.
Creative Variations
Use a limited palette of three colors for a quieter patchwork effect, or make every square center a different shade. Swap the deep teal trim for plum or warm ivory. Make the cardigan longer by adding a row of squares, or widen the back with another column.
For a simpler look, use one color for the sleeves and all square borders. You can also make the front band narrower by working fewer ribbing rows.
How to Use or Style Your Crochet Project
Wear the cardigan open over a plain T-shirt, tank, or long-sleeved top so the patchwork remains visible. The relaxed shape works well with jeans, simple skirts, or casual dresses. Because it has no closure, it is designed as a layering piece rather than a windproof outer coat.
Care and Maintenance
Follow the care instructions on your yarn label. If the yarn is washable, place the cardigan in a mesh bag and use a gentle cycle only if the label allows it. Reshape it while damp and dry it flat to reduce stretching. Store it folded rather than hanging, since the weight of the squares and sleeves can lengthen the garment over time.
Frequently Asked Questions
Is this granny square cardigan suitable for beginners?
It uses basic stitches, but garment assembly and sizing require patience. A confident beginner who can crochet a granny square and sew seams can follow the draft.
How many granny squares does this cardigan use?
The sample layout uses ten: six for the back and two for each front panel.
Can I make the cardigan in a different size?
Yes. Change the square dimensions, add or remove a back column, or adjust the sleeve-panel width. Make a swatch and check the layout against your measurements before assembly.
Can I use leftover yarn?
Yes, especially for the square centers. Use yarns of similar weight and fiber so the squares have consistent size and drape.
How do I make the sleeves longer?
Work additional hdc rows before seaming the sleeve panels. Measure from your shoulder to your preferred cuff position.
Do I need to add buttons?
No. This design has an open front. You could add a simple tie, but the front band should be secure enough to support it.
Conclusion
This colorful granny square cardigan pairs classic crochet motifs with simple rectangular sleeves and ribbed trim. The modular construction makes it easy to adjust the color layout and dimensions. Use a swatch and check the fit as you assemble the pieces to create a cardigan that suits your wardrobe.
Related Crochet Projects
- A matching granny square tote bag
- A simple crochet beanie in the cardigan’s trim color
- A patchwork crochet vest
- A striped crochet scarf using leftover yarn